NON-CONDUCTIVE SINGLE-LAYER WATER BLOCKING TAPE

These Tapes are laminated by polyester non-woven fabric layer and super swelling water absorbent powder. Due to the high swelling speed and excellent swelling height, it can easily block water and moisture to protect your cable.

Composition:
• Polyester Non-woven Fabric
• Polypropylene Super Absorbent Powder

Technical Characteristics Table:

Specification	Unit	WBT-C15S	WBT-C18S	WBT-C20S	WBT-C25S	WBT-C30S
Thickness	mm	0.15 ± 0.03	0.18 ± 0.03	0.20 ± 0.03	0.25 ± 0.03	0.30 ± 0.03
Mass per unit weight	g/m2	60 ± 5	65 ± 5	70 ± 10	80 ± 10	90 ± 10
Tensile strength	N/cm	≥ 25	≥ 30	≥ 30	≥ 35	≥ 35
Elongation	%	≥ 12
Swelling speed	mm/1.min	≥ 5	≥ 6	≥ 10	≥ 10	≥ 12
Swelling height	mm/3.min	≥ 8	≥ 9	≥ 12	≥ 14	≥ 16
Short term stability	°C	230
Long term stability	°C	90
Moisture content	%	≤ 8

Packaging and Marking:
The product will be packed in paper carton and fixed with Vacuum PE film inside. It is then sealed and packed on a wooden pallet. After it is fixed, an external plastic coversheet is wrapped around it to avoid water penetration.

Storage Information:
The product has a shelf life of 12 months from production date if stored in unopened original packages, under dry and clean conditions at temperatures between 10-30°C. The product will be damaged if stored in a moist area or contacted with water.