PET - POLYESTER TAPE

The Star Material Polyester Tape (also typically called PET or Mylar tape), is a transparent film, which has good tensile strength and good heat resistance attributes. The melting point is at around 255°C. It can be widely used in power cable, communication cable, coaxial cable, magnetic wires and other special cables.

We can provide different colors of this polyester tapes and also either slitted or as a jumbo (master) roll.

Technical Characteristics Table:

Specification	Unit	Typical Result (Slitted Tape)	Typical Result (Jumbo Roll)
Thickness	micron	12-100	8-100
Density	g/cm³	1.40±5%	1.40±5%
Width	mm	≥5	300-1000
Tensile Strength(MD)	Mpa	≥150	210
Elongation at break(MD)	%	≥80	160
Melting Point	°C	255	255
Heat Shrinkage(150°C, 30min)	%	≤3.5	≤3.5
Color	-	Natural, Red, Yellow, Blue, Green, Black, etc.	Natural, Red, Yellow, Blue, Green, Black, etc.

Winding Solution:

Type	ID (mm)	OD (mm)	Width (mm)	Core
Pad	52(2“), 58(2.3"), 76(3“), 83(3.25"), 102(4“), 152(6“)	Up to 600	≥5	Plastic, Paper
Spool	76(3“)	200-350	Up to 35	Paper
Jumbo	76(3“), 152(6")	300-800	500-1000	Paper

Packaging and Marking: The product will be packed in wooden barrel with PE film bag and bubble paper inside. It is then sealed and inserted in a wooden case. After it is fixed, an external plastic coversheet is wrapped around it to avoid water penetration.

Storage: The product has a shelf life of 12 months from production date if stored in unopened original packages, under dry and clean conditions at temperatures between 10-30°C. The product will be damaged if it is stored in a moist area or if it gets in contact with water.